MES Switch Core




The Managed Ethernet Switch IP core features a non-blocking crossbar matrix that allows continuous transfers between all the ports. It implements a Store & Forward switching approach that fulfills Ethernet standard policy regarding frame integrity checking. The switch buffers and verifies each frame before forwarding it. Nevertheless, the latency time has been minimized to nanoseconds order. Consequently, MES is the perfect switch to implement Ethernet based Industrial Networks.

MES is a tri-speed (10/100/1000 Mpbs) switch IP and supports IEEE 1588 V2 Transparent Clock functionalities. This features modifies PTP event messages taking into account the time spent crossing the switch. This scheme improves distribution accuracy by compensating delivery variability across the network.

Furthermore, MES also supports IEEE 1588 V2 One Step Transparent Clock Peer-to-Peer (P2P) functionality by using independent hardware for each port. This feature allows compensating the residence time but also the delay of each link.

MES can be used in combination with SoC-e HSR-PRP Switch IP to introduce HSR and PRP capabilities in the ports that are required. HSR switching approach is Cut Through. Thus, the combination offers the maximum performance and maximum compatibility with the standards. It provides MII/GMII/RGMII native interfaces for Ethernet PHY devices and it can be combined with Xilinx IP to support RMII or SGMII among other interfaces. It also supports and AXI4-Stream interface to be connected to other IP Cores that do not feature MAC based interfaces.

Key Features


  • Full-duplex 10/100/1000 Mbps Ethernet Interfaces
  • Half-duplex 10/100 Mbps Ethernet Interfaces
  • Full-duplex 10 Gbps Ethernet Interfaces (Under Development)
  • Configurable 3 to 16 Ethernet ports
  • MII/RMII/GMII/RGMII/SGMII/QSGMII Physical Layer device (PHY) interfaces
  • Different data rate supported for each port
  • Copper and Fiber optic media interfaces: 10/100/1000Base-T, 100Base-FX, 1000Base-X


  • Dynamic MAC Table with automatic MAC addresses learning and aging (up to 2048 entries)
  • Static MAC Table (up to 2048 entries)
  • Jumbo Frame Management
  • Ethertype Based Switching
  • Ingress Port Mirroring
  • Broadcast/Multicast Storm Protection
  • Per-Port Rate limiting (Broadcast, Multicast and Unicast traffic)

Time Synchronization

  • IEEE 1588v2 Stateless Transparent Clock functionality (P2P – Layer 2/ E2E – Layer 2)
  • Compatible with SoC-e IEEE 1588 IP Cores (1588Tiny, PricesTimeBasic)


  • RSTP (Software stack required)
    • Hardware support for RSTP
    • Reference RSTP stack for Linux provided with the IP Core
    • Posix Compatible RSTP stack available
  • MRP (Software stack not required)
    • Ring Manager (MRM)
    • Ring Client (MRC)
  • DLR (Software stack not required)
    • Beacon Based Node
    • Supervisor Node


  • MDIO, UART, AXI4-Lite or CoE (Configuration-over-ethernet) management interfaces
  • Configuration-over-Ethernet (COE): Full access to internal registers through the same Ethernet link that connects to the CPU
  • Drivers are provided with IP Core purchase
MES I/O Diagram

Supported FPGAs

  • 6-Series (Spartan, Virtex)
  • 7-Series (Zynq, Spartan, Artix, Kintex, Virtex)
  • Ultrascale (Kintex, Virtex)
  • Ultrascale+ (Zynq MPSoC, Kintex, Virtex)

Embedded Development Suite

A hardware development platform is available. Latest documentation, design support files, reference design source files and tools are available for download free of charge.

* Device supported by the free Xilinx Vivado WebPACK tool.

Pricing, Availability and Ordering

  • Concurrent EDA is the US Distributor for SoC-e.
  • Currently Available to US customers only.
  • Please email Ray at This e-mail address is being protected from spambots. You need JavaScript enabled to view it with questions / quotes / orders.


5001 Baum Blvd Ste 640
Pittsburgh PA 15213