TE0712 Artix 7 Module Datasheet

TE0712 Artix 7 FPGA Module

TE0712 Artix 7 Module Block Diagram

Overview

Trenz Electronic TE0712s are industrial-grade FPGA modules integrating a Xilinx Artix-7 FPGA, an Ethernet transceiver (100 Mbit Ethernet Phy in RGMII Mode), 1 GByte DDR3 SDRAM, 32 Mbyte Flash memory for configuration and operation, and powerful switch-mode power supplies for all onboard voltages.  A large number of configurable I/Os are provided via rugged high-speed stacking strips. All modules in 5 x 4 cm form factor are fully mechanically and largely electrically compatible among them. All this on a tiny footprint, smaller than a credit card, at the most competitive price. A free and open embedded development suite with reference designs is included.

Key Features

  • Industrial-grade Xilinx Artix-7 FPGA module (100T*, 200T*)
  • 256 Mbit (32 Mbyte) Quad-SPI Flash memory (for configuration and operation)
  • 4 MGTs (multi gigabit transceivers)
  • 1 GByte DDR 3 Memory
  • 100 Mbit Ethernet PHY in RGMII Mode
  • Programmable Low Jitter PLL (Silicon Labs Si5338)
  • On-board high-efficiency DC-DC converters
    • Core voltage regulator: 10 A
    • Supply voltages: either 3.3 V or 3.3 V and 5 V
  • Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
  • Up to 154 (75 differential pairs + 4 single-ended) single-ended FPGA I/O pins available on B2B strips
  • 2 user LEDs (through system controller)
  • Only 5 x 4 cm!
  • AES bit-stream encryption
  • Evenly spread supply pins for good signal integrity
  • Assembly options for cost or performance optimization available on request

Heatsink - Spring-Loaded

Heatsink for TE0712

Made especially for TE0712 board, spring-loaded, weight: 60g

Part No. 26924

Package Contents

  • 1 Thermal Pad
  • 4 pressure springs
  • 2 spacers
  • 3 washers
  • 4 screws

Embedded Development Suite

A hardware development platform is available. Latest documentation, design support files, reference design source files and tools are available for download free of charge.

* Device supported by the free Xilinx ISE WebPACK tool.

Available Models

ModelSize (cm)FPGARAMEthernetTemp.
Range
Availability
TE0712-02-35-2I 4 x 5 XC7A35T-2FGG484I 1 GByte DDR3 100 MBit industrial 1 - 2 weeks
TE0712-01-100-2C 4 x 5 XC7A100T-2FGG484C 1 GByte DDR3 100 MBit commercial 1 - 2 weeks
TE0712-02-100-2C 4 x 5 XC7A100T-2FGG484C 1 GByte DDR3 100 MBit commercial 1 - 2 weeks
TE0712-02-100-2C3 1 4 x 5 XC7A100T-2FGG484C 1 GByte DDR3 100 MBit commercial 1 - 2 weeks
TE0712-02-100-1I 4 x 5 XC7A100T-1FGG484I 1 GByte DDR3 100 MBit industrial 1 - 2 weeks
TE0712-02-200-2I 4 x 5 XC7A200T-2FBG484I 1 GByte DDR3 100 MBit industrial 1 - 2 weeks
TE0712-02-200-2C 4 x 5 XC7A200T-2FBG484C 1 GByte DDR3 100 MBit commercial 1 - 2 weeks
TE0712-02-200-2C3 1 4 x 5 XC7A200T-2FBG484C 1 GByte DDR3 100 MBit commercial 1 - 2 weeks
TE0712-02-200-1I 4 x 5 XC7A200T-1FBG484I 1 GByte DDR3 100 MBit industrial 1 - 2 weeks
TE0712-02-200-1I3 1 4 x 5 XC7A200T-1FBG484I 1 GByte DDR3 100 MBit industrial 1 - 2 weeks

Pricing, Availability and Ordering

  • Now available for order.
  • Concurrent EDA is the US Distributor for Trenz Electronic FPGA Micromodules.
  • Please email Ray at This email address is being protected from spambots. You need JavaScript enabled to view it. for pricing and orders.