•  

TEB0729 - Zynq TE0729 (w/ USB)

TEB0729 Carrier Board for Zynq TE0729 (w/ USB)

Zynq TE0729 carrier board

Overview

The Trenz Electronic TEB0729 carrier board was especially designed and developed for the use of Trenz Electronic module TE0729. It provides low-cost connection and extension to Trenz Electronic micromodules from the TE0729 series.

Specifications

  • Barrel jack for 5V power supply
  • 2x RJ45 10/100-BaseT Ethernet MagJack with 2 integrated LEDs
  • 1x RJ45 Gigabit Ethernet MagJack with 2 integrated LEDs.
  • 2x Configuration EEPROM's, connected to SoM's I²C interface
  • XMOD compatible header to connect the TE0790 USB2.0 adapter board
  • JTAG and UART interface over XMOD header
  • MicroSD Card socket, can be used to boot system
  • USB2.0 socket
  • 4-bit DIP switch for SoM configuration (SoM's JTAG access and Bootmode)
  • VG96 connector soldering-pads J8 for access to SoM's PL-IO-bank-pins, usable as LVDS-pairs
  • VG96 connector soldering-pads J9 for access to further interfaces and IO's of the SoM
  • 1 x user LED (red)
  • 1 x user push-button routed to SoM (Reset function at standard configuration)
  • Pin headers to set PL-IO-bank's VCCIO with jumper

Package Contents

  • 1 x TEB0729-03A carrier board for TE0729

Available Models

ModelModuleForm FactorPower OptionsAvailability
TEB0729-03A Zynq TE0729 (w/ USB) Not Available 5V DC Power Supply 1 - 2 weeks

Pricing, Availability and Ordering

  • Concurrent EDA is the US Distributor for Trenz Electronic FPGA Micromodules.
  • Currently Available to US customers only.
  • Please email Ray at This e-mail address is being protected from spambots. You need JavaScript enabled to view it with questions / quotes / orders.

Contact

Telephone
412.687.8800
Address
5001 Baum Blvd Ste 640
Pittsburgh PA 15213
Email
info@concurrenteda.com