•  

TEBA0841 - TE0841/TE0741 Base

TEBA0841 Simple Baseboard for TE0841 and TE0741

TE0841/TE0741 baseboard

Overview

The TEBA0841 was designed as a low-cost carrier board for Trenz Electronic TE0841 and TE0741 modules. The I/O's of the two FPGA I/O banks can be directly connected to your own circuits with the two 50-pole Pin headers.

Specifications

  • Trenz 4 x 5 Module Socket (3x Samtec LSHM Series Connectors)
  • 1 x XMOD (TE0790) Pin Header
  • 1 x Pin Header 16 pol. (JTAG, MGT-CLK, Boot Mode, RST, I/O's)
  • 1 x Pin Header 10 pol. (SD I/O's)
  • 2 x Pin Header 50 pol. (FPGA Bank I/O's and Power)
  • 1 x SFP Connector
  • 1 x MicroUSB
  • 1 x Pin Header for FPGA Bank Power VCCIOA (M1.8VOUT, 2.5V, 3.3VOUT)
  • 1 x Pin Header for FPGA Bank Power VCCIOD (M1.8VOUT, 2.5V, 3.3VOUT)
  • 1 x LDO Voltage Regulator 3.3V to 2.5V
  • 2 x User LED (Red/Green)

Package Contents

  • 1 x TEBA0841-0 carrier board

Available Models

ModelModuleForm FactorPower OptionsAvailability
TEBA0841-02 TE0841/TE0741 Not Available Not Available 1 - 2 weeks

Pricing, Availability and Ordering

  • Concurrent EDA is the US Distributor for Trenz Electronic FPGA Micromodules.
  • Currently Available to US customers only.
  • Please email Ray at This e-mail address is being protected from spambots. You need JavaScript enabled to view it with questions / quotes / orders.

Contact

Telephone
412.687.8800
Address
5001 Baum Blvd Ste 640
Pittsburgh PA 15213
Email
info@concurrenteda.com