Carrier Boards Overview
 |
 |
 |
 |
Developing your own interfaces for FPGA prototyping is both expensive and time consuming, which is why Trenz provides a variety of carrier boards so that you can focus on development, not setup.
Trenz carrier boards provide low-cost connection and extension to a variety of FPGA modules, which makes "plug & play" an easy and viable solution for FPGA prototyping.
| Model | Module | Form Factor | Power Options |
|---|---|---|---|
| TE0143-01 | Spartan-3 | 115 x 72 mm | DC Jack / USB |
| TE0303-01NC | Spartan TE0300/TE0630 | 115 x 70 mm | DC Jack / USB |
| TE0323-00 | Spartan-3A | 115 x 70 mm | DC Jack |
| TE0603-03 | Spartan-6 TE0600 | 115 x 70 mm | DC Jack |
| TE0703-05 | Zynq 4x5 | 4 x 5 cm | 5V Barrel Jack |
| TE0701-06 | Zynq 4x5 | 4 x 5 cm | 12V Power Supply |
| TE0705-04 | Zynq 4x5 | 4 x 5 cm | 12V Power Supply |
| TE0706-02 | Zynq 4x5 | 4 x 5 cm | DC Jack |
| TEB0728-02 | Zynq TE0728 | Not Available | DC Jack |
| TEB0729-03A | Zynq TE0729 (w/ USB) | Not Available | 5V DC Power Supply |
| TEB0745-02 | Zynq TE0745 | 20 x 23.1 cm | 24V Power Supply |
| TEBA0714-01 | Artix TE0714 | Not Available | Not Available |
| TEBB0714-01 | Artix TE0714 | Not Available | Not Available |
| TEBT0782-01 | TE0782 | 115 x 115 mm | 12V Input |
| TEBT0808-01 | TE0808/TE0803 | Not Available | 3.3V Input |
| TEBF0808-04 | TE0808/TE0803 UltraITX+ | Mini-ITX | ATX 12V Power Supply 12V DC Plug Optional |
| TEBA0841-02 | TE0841/TE0741 | Not Available | Not Available |